Main Product Image

Martin Audio - DX0.6

Martin Audio
Audio Loudspeaker Processors

2 in, 6 out network system controller




Description

Both processors offer a substantial array of processing options. Routing is freely assignable from the 2 inputs to the 6 outputs. Input and output equalisation is available with a choice of 14 filter options. An input noise gate will help deal with noisy signal sources. Input and output delay is ava


Specifications

Name Value
Input impedance: 20k Ohm balanced
Output Imp: 100R
Max Input level: +20dBu
Max Output level: +18dBu
Crosstalk: <-95dB
Sample Rate: 96kHz
Signal to noise ration >113dB (A weighted)
Noise Floor: <-94dB (A weighted)
Common Mode Rejection Ratio 60dB
Frequency Response: 20Hz - 40kHz +0.3dB
Input A/D Dynamic range: 118dB
Output D/A Dynamic range: 118dB
THD (+4dBu 1kHz): <0.003%
Mains Voltage Range: 85-230VAC 50-60Hz
Nominal power Consumption: 30W
Audio input: 2 x 3 pin female XLR
Audio output: 6 x 3 pin male XLR
Ethernet: Shielded RJ45, Dynamic or Static IP
RS485: 2 x RJ45
USB: 1 x USB B (Front Panel)
Mains: 3 pin IEC
Signal Generator: White/pink noise, -30dBu to +10dBu
Gain: -18dB to +12dB, step accuracy 0.1dB
Input Equaliser: 10 band PEQ, gain range +15dB 14 x Filter types
Input Gate: Threshold: -40 to -80dBu Attack: 1 to 1,000ms Release: 1 to 1,000ms
ROUTING: Freely assignable 2-in, 6 out Up to 30dB attenuation on each node
Delay: Input: 600ms Output: 200ms Steps: 20us, Units: milliseconds, metres, feet
Output Filters: High & Low Pass, -6dB/Octave to -48dB/Octave Slope types: Butterworth, Bessel, Linkwitz Riley
Output Equalisation: 8 band PEQ, gain +15dB 14 x filter types FIR Filter Import
Program Limiter: Threshold: -10 to +20dBu Attack: 1 to 1,000ms Release: 10 to 3,000ms
Peak Limiter: Threshold: 0 to 12dB above Program Limiter Threshold Release: Fast (91ms), Medium (350ms), Slow (800ms)
Height: 1U (44mm) [1.75”]
Width: 482mm [19”]
Depth: 230mm [9.1”]
Weight: 3.0kg [6.6lb]